NVAEasyJEE 2023Streamline & Turbulent Flow, Critical Velocity

JEE Physics 2023 Question with Solution

The surface of water in a water tank of cross section area 750cm2750 \, \text{cm}^2 on the top of a house is hmh \, \text{m} above the tap level. The speed of water coming out through the tap of cross section area 500mm2500 \, \text{mm}^2 is 30cm/s30 \, \text{cm/s}. At that instant, dhdt\frac{dh}{dt} is x×103m/sx \times 10^{-3} \, \text{m/s}. The value of xx will be _____.

Answer

Correct answer:2

Step-by-step solution

Standard Method

Given: Cross-sectional area of tank surface is A1=750cm2A_1 = 750 \, \text{cm}^2, cross-sectional area of tap is A2=500mm2A_2 = 500 \, \text{mm}^2, and speed of efflux is V2=30cm/sV_2 = 30 \, \text{cm/s}.

Find: The value of xx in dhdt=x×103m/s\frac{dh}{dt} = x \times 10^{-3} \, \text{m/s}.

Using the principle of continuity:

A1V1=A2V2A_1 V_1 = A_2 V_2

where V1V_1 is the speed of the top surface of water.

Convert units and substitute:

A1=750×104m2,A_1 = 750 \times 10^{-4} \, \text{m}^2, A2=500×106m2,A_2 = 500 \times 10^{-6} \, \text{m}^2, V2=0.3m/sV_2 = 0.3 \, \text{m/s}

Therefore,

750×104V1=500×106×0.3750 \times 10^{-4} \, V_1 = 500 \times 10^{-6} \times 0.3 V1=500×0.3×106750×104=2×103m/sV_1 = \frac{500 \times 0.3 \times 10^{-6}}{750 \times 10^{-4}} = 2 \times 10^{-3} \, \text{m/s}

The height of water is decreasing, so

dhdt=V1=2×103m/s\frac{dh}{dt} = -V_1 = -2 \times 10^{-3} \, \text{m/s}

Comparing with dhdt=x×103m/s\frac{dh}{dt} = x \times 10^{-3} \, \text{m/s}, we get x=2x = -2. The solution concludes the asked value is taken in magnitude, so x=2|x| = 2.

Therefore, the value of xx is 22.

Sign Interpretation

Given: The water level falls as water leaves the tap.

Find: Whether the sign of dhdt\frac{dh}{dt} affects the numerical answer.

From continuity, the top surface moves downward with speed

V1=2×103m/sV_1 = 2 \times 10^{-3} \, \text{m/s}

Since hh decreases with time,

dhdt<0\frac{dh}{dt} < 0

Hence,

dhdt=2×103m/s\frac{dh}{dt} = -2 \times 10^{-3} \, \text{m/s}

So mathematically, x=2x = -2 if sign is retained. However, the provided solution and answer key take the required value as the magnitude.

Therefore, the accepted answer is 22.

Common mistakes

  • Using the continuity equation without converting cm2\text{cm}^2, mm2\text{mm}^2, and cm/s\text{cm/s} into SI units is incorrect because the areas and speed must be in compatible units. Convert all quantities first, then substitute.

  • Taking dhdt\frac{dh}{dt} as positive is incorrect because the water level is falling, so height decreases with time. First find the magnitude of the surface speed, then attach a negative sign for dhdt\frac{dh}{dt}.

  • Confusing the tap speed with the speed of the top surface is incorrect because the two cross-sectional areas are different. Use A1V1=A2V2A_1V_1 = A_2V_2 to relate them instead of setting V1=V2V_1 = V_2.

Practice more Streamline & Turbulent Flow, Critical Velocity questions

Get unlimited AI-adaptive practice, mastery tracking, and an AI tutor that explains every step — free to start.

Related questions